Mobile navigation
Fan Selection Software
Operating point
Select fan type
SC-F INT - Side channel blower with internal inverter

SC-F INT

Side channel blower with internal inverter

Side-channel blowers with an integrated inverter in the 87Hz technique, used in: pneumatic transport, pneumatic mail, graphic machines, pneumatic lifts, industrial vacuum cleaners, sewage treatment plants, electroplating plants, etc.
Now available from
Ventur & Venture Industries
Can be painted in a color
other than standard
Contact us

APPLICATION

Side-channel blowers are used in pneumatic transport.

Typical applications:

  • pneumatic transport,
  • graphic machines, pneumatic lifts, multi-stage filtration devices with a very high degree of dust separation,
  • industrial vacuum cleaners, pools, aeration in biological sewage treatment plants, electroplating plants, etc.,
  • for oil-free transport of non-aggressive and non-explosive gases.

CONSTRUCTION

  • side-channel blower with direct drive,
  • the impeller is made of aluminum alloy, dynamically balanced according to ISO 1940-1,
  • the housing is cast in aluminum alloy,
  • blower adapted to work in horizontal or vertical position,
  • standard color of the blower is gray RAL 7042,
  • maximum temperature of the transported medium is 60°C,
  • ambient temperature range from -20°C to +40°C.

MOTOR

  • asynchronous, three-phase 400V 100Hz (power up to 15kW),
  • degree of protection IP55,
  • insulation class F,
  • for use with frequency converter,
  • thermal protection (TP or TP and PTC) - in selected motors.
  • external cooling 230V, 50Hz

SPECIAL EXECUTIONS

  • motor with voltage and frequency of power different than standard,
  • motor with other than standard degree of protection,
  • motor equipped with sensors or additional cooling,
  • sealing between the housing and the motor,
  • maximum temperature of the transported medium above 60°C,
  • ambient temperature range below -20°C and above +40°C,
  • belt drive.

If the recommendations are not followed, the motor current increases disproportionately and the motor does not reach the rated speed. Under no circumstances should the frequency (rotational speed) be set higher than the 100Hz frequency stated on the nameplate, because the motor may be overloaded or the blower damaged due to too high speed.

The so-called boost, as this causes the drive motor to heat up too much. In order to protect the motor, a temperature sensor must be connected to the appropriate inputs of the converter.

Technical assistance

Choose a fan www.fanselectoronline.com

m3/h
Pa

Work characteristics

Dimensions

Type A H ØD
  mm mm mm
SC-F-10-INT-190T (vacuum) 410 250 300
SC-F-10-INT-190T (pressure) 410 250 300
SC-F-10-INT-260T (vacuum) 410 250 300
SC-F-10-INT-260T (pressure) 410 250 300
SC-F-20-INT-380T (vacuum) 410 250 300
SC-F-20-INT-380T (pressure) 410 250 300
SC-F-20-INT-520T (vacuum) 410 250 300
SC-F-20-INT-520T (pressure) 410 250 300
SC-F-30-INT-950T (vacuum) 410 250 300
SC-F-30-INT-950T (pressure) 410 250 300
SC-F-40-INT-1900T (vacuum) 410 250 300
SC-F-40-INT-1900T (pressure) 410 250 300
SC-F-50-INT-2600T (vacuum) 410 250 300
SC-F-50-INT-2600T (pressure) 410 250 300

Additional equipment


Venture Industries Group