Fan Selection Software
Operating point
Select fan type
Controller
There are no products that match your search criteria
- 0
DIO-M-D4
The DIO-M-D4 is an input / output module for Modbus RTU network with 4 digital inputs, 4 digital outputs and Modbus RTU communication. more- 0
DDACM-03
DDACM-03 is a module for converting Modbus RTU (RS485) data into an analog / modulating output signal (0-10 VDC / 0-20 mA / PWM). Powered by Modbus, all parameters are available via Modbus RTU. more- 0
MDACM1
MDACM1 is designed to convert a Modbus RTU signal (RS485) to an analog / modulated output signal (0-10 VDC / 0-20 mA / PWM). It is powered by Modbus and all parameters are available via Modbus RTU. more- 0
EVSS
EVSS Electronic speed controllers automatically control the speed of single-phase voltage controlled electric motors (230 VAC / 50-60 Hz). more- 1
- 0
REB-ECOWATT
REB-ECOWATT - used for external speed control of electronically commutated DC motors (TD-ECOWATT).
- 2
- 0
REB
The controllers adjust rotational speed of a motor by changing voltage applied to the motor in a stepless manner.
- 2
- 0
REB-1R
Regulator prędkości wyposażone w przełącznik do rewersyjnej zmiany kierunku przepływu powietrza,- P max = 400 W
- 5
- 0
VREB
Single-phase, continuously variable thiristor speed governor in surface mounted version. Controller designed for cooperation with electric engines supplied by single phase (230 / 50Hz) current, adapted for voltage speed control.- 7
- 3
RMB, RMT
The controllers adjust rotational speed of a motor by changing voltage applied to the motor. Voltage is gradually regulated by a transformer.- NEW
- 8
- 1
RVS
Single-phase, five-stage transformer regulator. Surface mounting. Controllers equipped with an additional 230 V unregulated output signaling operation (max. Load 2 A).- NEW
- 9
- 1
RVS-A
Single-phase (230V / 50Hz), five-stage transformer controller with a control input. The value of the output voltage changes in steps to the value of the external analog signal.- NEW
- 10
- 13
RVT EX
Three-phase (3x400V / 50Hz), five-stage transformer regulator, having an integrated thermal protection relay from PTC sensors.- 11
- 0
CPR-EC
The CPR-EC controller controls the rotational speed of the EC fan, stabilizing the pressure difference between the ventilation duct,and the reference pressure. more- 11
CPR-2
The CPR-2 controller controls the fan rotation speed, stabilizing the pressure difference between the ventilation duct and the reference pressure.- P max = 200 W
- 11
USRG EC
USRG EC are modules for controlling EC fanson the basis of temperature, provided for ventilation of the transformer station.- P max = 60 W
- 12
- 0
CPR-ES
Adjuster with an alphanumeric CPR-ES display. Communication between the device and the CPR-EC controller is done by using the communication cable (included).- 13
- 0
RND-1
Single-phase, six-stage dual-thyristor regulator. Device for surface mounting.- P max = 500 W
- 16
- 1
L-F
Single phase power supply, with three-phase output, frequency converters for surface or cabinet mounting. Built-in potentiometer for frequency control and class A RFI.- P max = 2200 W
- 17
- 0
L
Three-phase supplied (3x400 V / 50 Hz) with three-phase output (3x400 V / 0.1-400 Hz), frequency converters for surface or enclosure mounting (IP20 up to 11 kW, above IP00).- P max = 45000 W
- 18
- 1
VFTM
VFTM inverter - a device for variable adjustment of a motors rotation speed by changing frequency and voltage. The regulator is available in a single- and three-phase version in the power range from 0.37 to 15kW.- P max = 3000 W
- 21
- 0
PULSER
A device controlling heater based on user-defined temperature setpoint (0-30°C), or internal temperature setpoint.- 22
- 0
PULSER-D
A device controlling heater based on user-defined temperature setpoint (0-30°C), and external temperature sensor (not included).
- 24
- 0
TTC-2000
A device controlling heater based on user-defined temperature setpoint (0-30°C), and external temperature sensor (not included).- 25
- 0
TTC
A device controlling heater based on user-defined temperature setpoint (0-30°C), and external temperature sensor (not included).- NEW
- 27
- 0
TRAFO60
A single-phase compact protective transformer for industrial applications. It is characterized by low sound level and high resistance to moisture, dust and vibration.- NEW
- 28
- 0
TT-S4/D
Based on a stepper microprocessor controller used to control the electric heating system. It has been designed to work with TTC40 or other drivers, including DDC controllers.- 29
- 0
TGK
Channel sensor TG-K – channel temperature sensor for use with PULSER, PULSER-M, PULSER-D, TTC-2000, TTC-25, TTC-40F.- 30
- 0
TG-R
Room temperature sensor for use with PULSER, PULSER-M, PULSER-D, TTC-2000, TTC-25, TTC-40F.- 31
- 0
